Added the function of Fast Hash, details are as follows.

Normally, during a frequency search phase, a miner’s hashrate may be in a low state before reaching its final level. If you want to quickly increase the miner’s hashrate to 80% of final hashrate in an early stage of frequency search, you can enable a fast hash function. It should be noted that this feature is not applicable to all models, and there are differences in the percentage of hashrate that different models can achieve during the frequency search phase.

 Step 1 Select an IP address of a miner you want to enable a fast hash function.

You can also select multiple IP addresses of multiple miners.

Step 2 Click Remote Ctrl, click Fast Hash, and then click OK.

Figure 1-1

Step 3 When a Fast Hash dialog box pops up, click On, and then click OK.

Note：For VG/VH/VJ version, this feature is not supported.

Figure 1-2