The operation guide for hydro-cooling miners suggests that liquid inside the miners should be completely drained during storage and transportation. If the miners suddenly or temporarily taken away from a cabinet and the liquid in the miners is not completely drained, what impact will it have?
whatsminer
2026.03.05
11
0
If liquid in hydro-cooling miners is not completely drained during storage and transportation, it will cause the following impacts.
If there is no corrosion inhibitor: excessive pressure inside hydro-cooling plates may cause the hydro-cooling plates to bulge, thereby damaging the hydro-cooling plates and hashboard.
If the corrosion inhibitor recommended by WhatsMiner is added, there is usually no obvious problem within one week, but the above-mentioned damage risk may still occur beyond this period.
Is it helpful?
Yes
No
Feedback
Login to comment
Hot Tags
Show More
Hot
- 1WhatsMinerTool_Operation Guide8K+
- 2WhatsMiner Hydro-Cooling Miner_Operation Guide5K+
- 3WhatsMiner API_User's Manual4K+
- 4WhatsMiner Air Cooling Miner_Operation Guide4K+
- 5 In WhatsMinerTool, there are two error codes about my miner, including 530 Slot 0 not found and 542 Slot 0 reading chip Id error. Could you guide me what should I do?3K+
- 6WhatsMiner Immersion Cooling Miner_Operation Guide3K+
- 7How is the "Power Limit" feature used to optimize mining in WhatsMinerTool?2K+
- 8How does Performance Mode affect mining operations in WhatsMinerTool?2K+
- 9Simple introduction to quick connectors for hydro-cooling miners2K+
- 10In WhatsMinerTool, How to Overclock by Configuring Power Adjustment?2K+