1. How to Overclock through API?

To overclock through an API, it is mainly necessary to understand which instructions can be used for overclocking. I will use an existing API documentation on the official website as an example to introduce them.

For example, in API 3.0.1 (Whatsminer API),

The following instructions can increase the power of a miner to run at high performance, or more directly, overclocking.

I Set Miner Power

II Set Miner Power Mode

III Set Miner Power Percent

IV Set Target Frequency

In our old version of the API document, that is, WhatsMiner API-User's Manual-20250509, there are chapters that introduce overclocking instructions, including: 3.6 Switch Power Mode; 3.13 Set Target Frequency; 3.21 Set Power Percent (Fast Mode); 3.22 Set Power Percent V2 (Normal Mode); and 3.23 Set Power Value.

2. Is Time for Overclocking through API Same as through WhatsMinerTool?

Same.

API and WhatsMinerTool are just different in the way they give instructions, and in a good network, the difference is not too significant.